"Tanzer Boat Parts"
Eric Spencer, who
was the president of Tanzer Industries, until 1985, when
he sold his interest in the company, has been supplying
replacement parts and sails for all Tanzer models since
1986, through Yachting Services.
He has decided
to reduce his work load, and have others do the job.
Consequently, as of February 25, 2005, all inquiries and
orders should be directed to; Ken Hodgson
Tanzer Boat
Parts
P.O.Box 375
Hudson, QC. J0P 1H0
Canada
Telephone
450-458-4715
Fax 450-458-2176
e-mail kch@sympatico.ca
The principals
of this company are Steve Thom, an ex employee of Tanzer
Industries, and Ken Hodgson, who owns Tanzer 22 #1093
"Sloop Du Jour", and is an avid sailor. Thus
they are very familiar with the Tanzer product line and
specifications, and are well qualified for this role.
Eric Spencer
will work closely with them, and remains available to
Tanzer owners for advice. info@yachtingservices.ca
514-697-6952. Eric is remaining in the boating
industry, do you need a Prop Protector or a very Versatile Inflatable?
A partial list
of the items available from Tanzer Boat Parts follows.
Although this is posted on the Tanzer 22 web-site, it is
the case that Tanzer Boat Parts can supply replacement
parts and sails for all Tanzer models.
Please contact Mr.
Hodgson for
information on prices and to confirm exactly what parts
are available for your Tanzer. They operate out of the
Montreal area at the address indicated above.
List of Tanzer Parts / list provided by
"Tanzer Boat Parts"
Anchor well cover (no fittings, white
only).
Backstay adjuster kit, for split
backstay.
Boom vang
Boom vang plate.
Bow pulpit--7/8" diam., single.
Boarding ladder--4-step, transom mount,
fold down.
Boom, with or without fittings.
Cabin top lifelines and handrails.
Cockpit cushions--2" white vinyl, 4
pcs.
Cockpit lifelines and pelican hooks.
Cockpit locker hatches--white only, bare.
Cockpit locker hatch sponge--20' roll.
Cockpit locker hatch hinges.
Cockpit locker hasp set.
Convertible hatch--retrofit kit.
Convertible hood--retrofit kit.
Companionway sliding hatch.
Decals.
Genoa sheet block--screwdown stop.
Genoa sheet block--spring stop.
Genoa sheet turning block.
Gooseneck track.
Vent covers for dropboards and gas line
vent.
Wheel steering--retrofit kit.
HALYARDS
Mainsail--wire only, with shackle.
Jib/Genoa--wire only, with shackle.
Rope tails--main or jib/genoa.
Spinnaker--with snap shackle.
Head liner plugs--white.
Icebox--complete; woodgrain door.
Lifting bridle and keel plates--retrofit
kit.
Mast, with or without fittings.
Mast heel casting.
Masthead fitting.
Mainsheet traveler--retrofit kit.
NAVIGATION LIGHTS
Port/Sbd running lights--side mounted.
Port/Sbd running lights--deck mounted.
Stern.
Steaming.
Outboard motor bracket--spring-loaded,
stainless steel.
Owner's guide--photocopy edition, postage
included.
Port inserts--smoked acrylic.
Port spline--4' required per port.
Port sponge--4' required per port.
Rubrail--white PVC, with installation
instructions.
|
Rubrail cap.
Rudder gudgeons.
Rudder pintles--long and short.
Rudder--new style; high performance.
RUNNING RIGGING
Mainsheet--3/8" diam.
Jib sheets--3/8" diam.
Genoa sheets--7/16" diam.
Spinnaker halyard--c/w shackle;
5/16" diam.
Spinnaker sheets--c/w shackle; 5/16"
diam.
Spinnaker pole uphaul--c/w snaphook;
5/16" diam.
Spinnaker pole downhaul--c/w snaphook;
5/16" diam.
(Prices include eye splices where
applicable; choice red, blue, or green
tracer).
SAILS
Mainsail--5 oz.; includes 1 row jiffy
reefing.
(add 20% for fully battened).
Working jib--5 oz.
Genoa #1--170% LP; 4 oz.
Genoa #2--145% LP; 4 oz.
Storm jib--8 oz; 50 sq. ft.
Spinnaker--triradial; racing; 0.75 oz.
Spinnaker--radial; 0.75 oz.
Spinnaker--cruising poleless; 0.75 oz.
Sail cover--main; acrylic; choice of
colour.
STANDING RIGGING
Forestay.
Backstay.
Upper shroud.
Lower shroud.
Main topping lift.
Split backstay--retrofit kit.
Spinnaker gear--retrofit kit.
Spinnaker pole.
Spreaders.
Stern rail--7/8" diam.; single.
TEAK
Companionway hatch runners.
Dropboard channels.
Handrails.
Toe rail.
Cabin sole--teak and holly.
Turnbuttons--anchor well cover.
TURNBUCKLES
Gibb--5/16"; closed barrel.
Merriman style--5/16" open barrel.
|
|